Steel, wood and stainless benches built to your room drawings — with the worktop, sink and service fittings you specify.
A bench is only as good as its frame and its worktop. We build both in the same factory, so the carcass, the cut-outs and the service fittings arrive matched, labelled by room and ready to assemble.
These are our standard values. Anything here can be changed to suit your drawings or local code — just tell us what has to be different. A bench run usually needs a fume hood and storage cabinets in the same finish.
| Frame | 40 x 60 mm steel tube, 1.5 mm, epoxy powder coated; stainless 304 available |
|---|---|
| Worktop | 12.7 / 16 mm phenolic, 16 / 19 mm epoxy, 20 mm ceramic, or 1.2 mm stainless 304/316 |
| Carcass | 1.0 mm cold-rolled steel with powder coating, or 18 mm melamine-faced chipboard with PVC edge |
| Drawers | Steel drawer boxes on nylon rollers or soft-close runners |
| Handles | Aluminium alloy or stainless steel, recessed or bar type |
| Feet | M10 adjustable levelling feet; castors optional for mobile benches |
| Finish | Any RAL colour; standard is light grey body with dark grey plinth |
| Packing | Knock-down, EPE foam, carton, plywood crate; labelled by room and item |
Yes. Send DWG, PDF or even a hand sketch with dimensions. We return shop drawings for your approval before cutting, and we do not start production until you sign off.
Standard benches run about 25 to 35 days after drawing approval, depending on quantity and finish. Fume hoods with blowers take a little longer. We confirm the date in the quotation.
Yes — PP or ceramic sinks, single and three-way taps, gas valves, eyewash and power sockets can all be fitted and tested before packing.
Send a DWG, PDF or a photo with dimensions. You get back shop drawings with the carcass layout, the worktop material and a factory-direct price.
Send Your Drawings