ESD / anti-static workbenches

A controlled workstation for electronics work: a static-dissipative surface, a proper grounding path and storage that does not undo the protection.

Overview

Protect the components you handle

An ESD bench is only as good as its grounding path. We fit a static-dissipative worktop, bond the frame to a common ground point, and offer ESD-safe drawer units, shelves and seating to complete the station. Surface resistance and grounding are specified to the standard your project requires — tell us which one applies and we will build and document to it.

  • Static-dissipative worktop with controlled surface resistance
  • Frame bonded to a common grounding point
  • ESD-safe drawer units, shelves and accessories
  • Grounding lead and earth point supplied
  • Powder-coated steel frame; clean, sealed edges
  • Documented to the ESD standard specified by the project
Row of ESD anti-static workbenches with green static-dissipative worktops and white steel cabinet bases in an electronics laboratory
Specification

ESD Workbench specification

These are standard values; anything here can be changed to suit your drawings or local code. A bench run is usually specified with fume hoods and storage cabinets in the same finish.

WorktopStatic-dissipative laminate; resistance to the specified ESD standard
GroundingFrame bonded to a common earth point; grounding lead supplied
FramePowder-coated steel tube
StorageESD-safe drawer units and shelves available
Depth / height750 mm deep, 900 mm height standard; custom sizes accepted
AccessoriesGrounding plug, wrist-strap point, ESD mats and trays
FinishLight grey standard; other RAL colours available
PackingKnock-down, EPE foam, carton
Where it is used

Applications

  • Electronics assembly and repair
  • Component testing and inspection
  • Semiconductor and ESD-controlled areas
  • Instrument calibration workshops
Need a price for a specific room? Send the layout and the quantity list.
Get a Quote
Questions

Common questions

Which ESD standard do you build to?

We build to the standard your project specifies and can supply the relevant surface-resistance and grounding information. Tell us the standard at enquiry stage so we document it correctly.

Is the whole bench ESD safe?

The worktop, frame bonding and optional storage make the station ESD safe when installed as specified, including the grounding lead. Seating and mats should also be ESD-rated.

Can this be used as a normal lab bench too?

Yes in dry electronics and instrument work, but it is not a chemical bench. For wet chemistry use a phenolic, epoxy or stainless worktop instead.

Related

More lab benches from the same factory

Send a room plan, get a factory quote

Send a DWG, PDF or a photo with dimensions. You get shop drawings, a material schedule and a factory-direct price.

Send Your Drawings
WhatsApp