Peg boards and drying racks

A pegged board or rack that holds washed glassware upside down to drain, mounted on the wall or bench back panel in steel, PP or stainless.

Overview

Draining and organising washed glassware

The peg board or drying rack holds beakers, flasks and cylinders upside down over angled pegs so rinse water drains away and air circulates. It mounts on a wall or the bench back panel above a sink or drain area, and pegs are arranged to the glassware sizes in use. Steel, PP or stainless construction matches the surrounding cabinetry and washdown level.

  • Angled pegs for upside-down draining
  • Wall-mounted or bench back-panel install
  • Steel, PP or stainless construction
  • Peg layout to glassware sizes
  • Drip tray or drain provision below
  • Matched to sink and wash benches
Wall-mounted peg board glassware drying rack above laboratory sink
Specification

Peg Board & Drying Rack specification

These are standard values; anything here can be changed to suit your drawings, workload or local code. Equipment is normally specified together with the matching benches and extraction.

ConstructionCoated steel, PP or stainless 304/316 selected to washdown and chemistry
PegsAngled pegs spaced to bottles, flasks and cylinders in use
MountingWall-fixed or fixed to bench back panel
DrainingDrip tray or drain position below the rack
LayoutPeg count and spacing to the glassware list
ConstructionMaterial and finish selected to the chemicals, washdown regime and project specification
CustomisationDimensions, service positions and fittings adjusted to the project drawing
PackingKnock-down or assembled, EPE foam, carton, plywood crate for sea freight
Where it is used

Applications

  • Glassware washing benches
  • Wet lab draining areas
  • Central glassware stores
  • Teaching and prep rooms
Need a price for a specific room? Send the layout and the inventory list.
Get a Quote
Questions

Common questions

How many pegs do we need?

Count the daily washed flasks, beakers and cylinders; we space the pegs to hold that volume on the available panel width.

Can it sit above a sink?

Yes, the rack mounts above or beside the sink so drips fall into the bowl or a tray.

Which material for acid areas?

Choose PP for corrosive washdown, stainless for sanitary wet areas, coated steel for dry general use.

Related

More supporting lab equipment and fittings

Send your layout and requirements, get an engineered quote

Send the room plan, equipment list and any chemical or process notes. You get back a schedule and a factory-direct price.

Send Your Drawings
WhatsApp