Bench reagent racks

A two- or three-tier rack that keeps frequently used reagents within reach above the bench, with rails and rests that stop bottles sliding off.

Overview

Reach-through bench storage

The reagent rack sits on or behind the bench to hold the bottles used most often during a session, freeing bench space for apparatus. Tier heights are set to reagent bottle sizes, with front rails or lips that keep bottles from sliding off. Steel, PP and stainless versions match the surrounding casework and chemical exposure.

  • Two- or three-tier shelf layout
  • Front retaining rail or lip per tier
  • Steel, PP or stainless construction
  • Bolted to bench or back spine where required
  • Bottle rests and dividers optional
  • Matched finish to the bench run
Two-tier steel-glass reagent rack with reagent bottles and glassware on a lab bench
Specification

Bench-Top Reagent Rack specification

These are standard values; anything here can be changed to suit your drawings or local code. A cabinet run is usually specified together with lab benches and extraction in the same finish.

ConstructionSteel epoxy coated, PP, or stainless 304/316
TiersTwo or three shelves, height set to bottle sizes
RetainingFront rail or raised lip on each tier
FixingBolted to bench top or service spine
OptionsDividers, under-tier trays, service feed-throughs
FinishEpoxy powder-coated steel (or polypropylene / stainless as specified); any RAL colour
SizesStandard widths 900, 1200, 1500 mm; custom widths and heights to your drawing
PackingKnock-down or assembled, EPE foam, carton, plywood crate for sea freight
Where it is used

Applications

  • Reach-through reagent storage
  • Bench-side frequent-use bottles
  • Central and side bench runs
  • Teaching and routine analysis labs
Need a price for a specific room? Send the layout and the inventory list.
Get a Quote
Questions

Common questions

Does the rack bolt to the bench?

It can sit free-standing on the bench or bolted to the bench top or back spine for stability; we specify the fixing on the drawing.

Can tiers hold tall reagent bottles?

Tier spacing is set to your tallest bottles; send the bottle heights and diameters and we will lay out the rack.

Which material for acid shelves?

For acids and corrosives choose PP; stainless suits sanitary or wet areas; coated steel suits general reagents.

Related

More storage cabinets from the same factory

Send the wall run and inventory, get a cabinet list

Send the room plan and what goes inside. You get back a schedule with sizes, lining, shelving and a factory-direct price.

Send Your Drawings
WhatsApp