A bench that hangs off the wall, leaving the floor clear below for cleaning, stools or equipment. Cantilever-built and fixed into the wall structure.
A wall-mounted bench frees the floor, which makes a small room feel larger and simplifies cleaning. We use a cantilever bracket and fix it into the wall structure, so the bench does not rely on the floor for support. Wall type and fixings are checked before manufacture — this is the one bench where the wall matters as much as the bench itself. Services can be run in the wall or in a surface trunking above the worktop.
These are standard values; anything here can be changed to suit your drawings or local code. A bench run is usually specified with fume hoods and storage cabinets in the same finish.
| Support | Cantilever steel bracket, fixed to wall structure |
|---|---|
| Fixings | Specified to the wall type; anchors supplied |
| Worktop | Phenolic, epoxy, ceramic or stainless 304/316 |
| Depth | 600–750 mm; deeper runs need additional support |
| Height | 900 mm standard; set to the operator |
| Services | Wall-fed or surface trunking for power and gas |
| Extras | Matching wall cabinets and upstands |
| Packing | Knock-down, EPE foam, carton |
Only if the fixings go into suitable structure. We will ask about the wall type before manufacture and specify the brackets and anchors accordingly — solid masonry and concrete are straightforward; lightweight partitions need reinforcement.
It depends on the wall and the bracket design. Send the equipment weight and we will size the support and confirm the fixing detail in the shop drawings.
Yes. Matching wall cabinets can be fixed to the same wall, with the service trunking run between the bench and the cabinets.
Send a DWG, PDF or a photo with dimensions. You get shop drawings, a material schedule and a factory-direct price.
Send Your Drawings