A welded polypropylene top for strong-acid and corrosive benches, where the work surface itself must resist acids and washdown without any steel contact.
The PP worktop is fabricated from welded polypropylene sheet so the surface resists strong dilute acids and corrosive splashes that stain or pit other boards. It pairs with PP benches, PP fume hoods and acid-resistant cabinets in wet corrosive rooms. Seams are welded closed, and any steel support sits below the PP rather than in the chemical contact path.
These are standard values; anything here can be changed to suit your drawings, workload or local code. Equipment is normally specified together with the matching benches and extraction.
| Material | Welded polypropylene sheet, 10–15 mm |
|---|---|
| Resistance | Dilute strong acids and corrosive aqueous agents; check solvents against the list |
| Construction | Welded seams; support frame below separated from the contact surface |
| Cut-outs | PP-sealed sink and tap openings |
| Sizes | Fabricated to bench length and depth |
| Construction | Material and finish selected to the chemicals, washdown regime and project specification |
| Customisation | Dimensions, service positions and fittings adjusted to the project drawing |
| Packing | Knock-down or assembled, EPE foam, carton, plywood crate for sea freight |
PP handles most dilute acids and aqueous reagents; strong organic solvents and oxidisers need a compatibility check against the chemical list.
Joints are welded in PP so there is no glued gap for acid to creep behind.
Yes, the steel frame supports from below; the PP top and any lining keep steel out of the splash path.
Send the room plan, equipment list and any chemical or process notes. You get back a schedule and a factory-direct price.
Send Your Drawings