A 304 or 316 stainless steel top over a substrate, non-porous and fully washable, chosen for sanitary, food and pharmaceutical wet areas.
The stainless worktop is formed from 304 or 316 sheet over a supporting substrate, giving a non-porous surface that can be hosed, scrubbed and sanitised without absorbing liquids. The grade is selected from the chemicals and cleaning agents in use; stainless is not immune to all acids, so strong-acid benches are matched to the correct grade or lining. Upstands and sink welds are finished smooth for cleanability.
These are standard values; anything here can be changed to suit your drawings, workload or local code. Equipment is normally specified together with the matching benches and extraction.
| Material | Stainless 304 standard, 316 on request; sheet over rigid substrate |
|---|---|
| Grade choice | Selected from chemical exposure, cleaners and washdown regime |
| Finish | Brushed/satin; welded and ground upstands and sink joints |
| Cut-outs | Sink, tap and service openings; welded seal at edges |
| Sizes | Formed to bench length and depth; substrate supported below |
| Construction | Material and finish selected to the chemicals, washdown regime and project specification |
| Customisation | Dimensions, service positions and fittings adjusted to the project drawing |
| Packing | Knock-down or assembled, EPE foam, carton, plywood crate for sea freight |
304 suits general sanitary use; 316 is chosen where chloride, saline or heavier corrosion appears. We grade it from your chemicals and cleaners.
It resists many mild agents but not all acids; strong or halide acids need a lined or PP alternative. Send the chemical list.
Yes, sink and upstand joints are welded and ground smooth for a cleanable finish.
Send the room plan, equipment list and any chemical or process notes. You get back a schedule and a factory-direct price.
Send Your Drawings