Two side frames carry the load, so an H-frame bench handles heavier equipment and longer runs without sagging. Built to your layout and finish.
An H-frame bench is supported at both ends, which makes it the right choice for long bench runs, analysers and equipment that needs a stable, level surface. The frames are welded, ground and powder coated, and the worktop is cut and edge-finished to match your services. We can add a lower shelf, a service spine or a reagent rack above the bench.
These are standard values; anything here can be changed to suit your drawings or local code. A bench run is usually specified with fume hoods and storage cabinets in the same finish.
| Frame | H-frame, 40x60 mm or 50x50 mm steel tube, 1.5–2.0 mm wall |
|---|---|
| Load rating | Heavy-duty; confirmed against your equipment in the quotation |
| Worktop | Phenolic, epoxy, ceramic or stainless 304/316 |
| Depth / height | 750–900 mm deep, 900 mm height standard; custom sizes accepted |
| Extras | Lower shelf, reagent rack, service spine, power and gas fittings |
| Feet | M10 adjustable levelling feet; anchors available |
| Finish | Any RAL colour |
| Packing | Knock-down, EPE foam, carton, plywood crate |
Use an H-frame when the bench carries heavy instruments, spans a long run, or needs a lower shelf. A C-frame is better for seated work where knee space matters more.
Yes. Send the equipment footprint and service positions and we will issue shop drawings showing the frame, worktop cut-outs and utility points before production.
Yes. We can build an island service spine with power, gas and data outlets to match the bench finish and your room layout.
Send a DWG, PDF or a photo with dimensions. You get shop drawings, a material schedule and a factory-direct price.
Send Your Drawings