A full cabinet bench with storage below and a worktop above. The most common choice where a lab needs usable bench space and abundant storage.
Floor-mounted casework gives you a continuous worktop with cupboards, drawers and shelving underneath. We build the carcass in steel or melamine-faced board, fit the worktop and services, and label every unit by room so the installer can set it straight. Plinths are recessed and adjustable, so the run sits level even on an uneven floor.
These are standard values; anything here can be changed to suit your drawings or local code. A bench run is usually specified with fume hoods and storage cabinets in the same finish.
| Carcass | 1.0 mm cold-rolled steel, powder coated; or 18 mm melamine-faced board with PVC edge |
|---|---|
| Worktop | Phenolic, epoxy, ceramic or stainless 304/316 |
| Base | Recessed plinth, adjustable; 100 mm standard |
| Storage | Doors, drawers, open shelving, sink cupboard, gas-cylinder cupboard |
| Depth / height | 750 mm deep, 900 mm height standard; custom sizes accepted |
| Hardware | Soft-close runners or nylon-roller drawer slides |
| Finish | Any RAL colour for steel; board colours from our range |
| Packing | Knock-down or assembled, by project requirement |
Yes — floor-mounted casework sits on the floor with a cabinet base. It offers the most storage of the bench types and is the standard choice for most laboratory rooms.
Yes. Send the room drawing and we will split the run into modules that fit the wall, with corner and end pieces detailed on the shop drawings.
Yes. We build a dedicated sink cupboard with PP or ceramic sinks, taps and a drip tray, plumbed and tested before packing.
Send a DWG, PDF or a photo with dimensions. You get shop drawings, a material schedule and a factory-direct price.
Send Your Drawings