Open legroom underneath, a rigid C-shaped steel frame, and a worktop cut to your sinks and services. The standard choice for seated bench work.
The C-frame puts both legs at the back of the bench, so the whole front is free for a chair, a stool and under-bench drawers. We weld the frame from 40x60 mm steel tube and powder coat it after fabrication. The worktop, cut-outs and service fittings are made in the same factory, so everything lines up on site.
These are standard values; anything here can be changed to suit your drawings or local code. A bench run is usually specified with fume hoods and storage cabinets in the same finish.
| Frame | 40x60 mm C-frame steel tube, 1.5 mm wall, powder coated; stainless 304 optional |
|---|---|
| Worktop | 12.7/16 mm phenolic, 16/19 mm epoxy, 20 mm ceramic, or 1.2 mm stainless 304/316 |
| Knee clearance | Open front; approx. 700 mm clear height under the worktop |
| Depth / height | 750 mm deep, 900 mm worktop height (standard); custom sizes accepted |
| Carcass | Optional 1.0 mm steel drawer unit or wall-hung cabinet |
| Services | Power trunking, gas valves, sinks and taps fitted at the factory |
| Finish | Any RAL colour; light grey standard |
| Packing | Knock-down, EPE foam, carton, plywood crate |
A C-frame leaves the space under the worktop open, so an operator can sit close and reach the bench properly. It is also quicker to install and easier to reconfigure than a full cabinet run.
Yes. We supply a slim under-bench drawer unit or a mobile pedestal that fits between the C-frames, matched to the same finish as the bench.
Phenolic is the usual choice for teaching and general labs. For heavy chemical work choose epoxy or ceramic; for cleanroom and washdown areas choose stainless steel.
Send a DWG, PDF or a photo with dimensions. You get shop drawings, a material schedule and a factory-direct price.
Send Your Drawings