Other laboratory equipment and fittings

Clean-air and biosafety units, worktops, supporting equipment and the taps, sinks and fittings that complete a finished laboratory.

Overview

Beyond benches, hoods and cabinets

A working laboratory needs more than the main furniture ranges. This category collects the clean-air and biosafety equipment, worktop materials, support equipment and bench fittings that make a room functional, all supplied from the same factory and matched to the bench and hood run.

  • Laminar flow and biosafety cabinets, air showers and pass boxes
  • Phenolic, epoxy, ceramic, stainless, PP and Trespa worktops
  • Container labs, dental tables and laboratory refrigeration
  • Sinks, seating, eyewash, taps, gas valves and extraction fans
  • Sizes, materials and service positions adjusted to your drawings
  • Supplied together with benches and hoods for one matched fit-out
Laminar flow clean bench and supporting laboratory equipment supplied by LabKern
Product range

Clean air, worktops, equipment and fittings

Select the item that fits your room. Every product below is built to your dimensions, material and service requirements.

Single horizontal laminar flow clean bench in a furnished laboratory
Horizontal Laminar Flow CabinetClean-air, containment or ventilation equipment.
Vertical laminar flow clean benches lined up in a laboratory room
Vertical Laminar Flow CabinetClean-air, containment or ventilation equipment.
Class II A2 biosafety cabinets installed in a clean laboratory room
Class II A2 Biological Safety CabinetClean-air, containment or ventilation equipment.
Class II B2 100% exhaust biosafety cabinets with ducted exhaust in a lab
Class II B2 Biological Safety CabinetClean-air, containment or ventilation equipment.
Stainless steel air shower chamber at a cleanroom entrance
Air ShowerClean-air, containment or ventilation equipment.
Stainless steel pass-through chamber embedded in a cleanroom corridor wall beside an interlocked door
Pass BoxClean-air, containment or ventilation equipment.
Modular stainless steel clean booth with transparent curtain enclosure in a cleanroom
Clean BoothClean-air, containment or ventilation equipment.
Hermetic cleanroom swing double door with vision panels
Cleanroom DoorClean-air, containment or ventilation equipment.
Laboratory wet scrubber spray tower for acid and alkaline exhaust gas treatment
Fume ScrubberClean-air, containment or ventilation equipment.
Black phenolic resin worktop on a central laboratory bench with reagent rack
Phenolic Resin CountertopWorktop material cut to your bench layout.
Seamless grey epoxy resin laboratory worktop with molded sink and marine edge
Epoxy Resin CountertopWorktop material cut to your bench layout.
Light ceramic worktop on a central laboratory bench with drying rack and tap
Ceramic CountertopWorktop material cut to your bench layout.
Polished stainless steel worktop on a central laboratory island bench with stainless steel drawers and overhead reagent rack
Stainless Steel CountertopWorktop material cut to your bench layout.
Light-colored welded PP worktop on white polypropylene casework with blue fittings and reagent rack
PP CountertopWorktop material cut to your bench layout.
Dark Trespa TopLab solid compact laminate worktop on a laboratory island bench
Trespa Toplab CountertopWorktop material cut to your bench layout.
Turnkey modular container laboratory fitted with benches, fume hood and services
Container LaboratorySupporting equipment built to the project.
Dental laboratory technician workbench with drawers, lamps and handpiece holders
Dental Lab TableSupporting equipment built to the project.
Laboratory refrigerator and freezer units lined up in a research lab room
Laboratory Refrigerator & FreezerSupporting equipment built to the project.
Stainless steel lab sink inset into a white worktop with two laboratory taps and a soap dispenser
Laboratory SinkBench fitting and accessory for the complete room.
Laboratory adjustable round stools on chrome five-star castor bases
Lab Stool & ChairBench fitting and accessory for the complete room.
Combined stainless steel eyewash and emergency safety shower station with overhead shower head
Eye Wash & Emergency ShowerBench fitting and accessory for the complete room.
Wall-mounted peg board glassware drying rack above laboratory sink
Peg Board & Drying RackBench fitting and accessory for the complete room.
Bench-mounted three-way laboratory water faucet over a sink on a black worktop
Laboratory Water FaucetsBench fitting and accessory for the complete room.
Range of laboratory gas taps and valves in single, double, triple and four-outlet configurations
Gas FaucetsBench fitting and accessory for the complete room.
Corrosion-resistant centrifugal exhaust fans ducted in a plant ventilation room
Lab Fans & ExtractorsClean-air, containment or ventilation equipment.
Stainless steel venturi VAV valve installed on laboratory exhaust ductwork
Venturi ValveClean-air, containment or ventilation equipment.
Digital fume hood LCD control panel mounted on the cabinet frame
Hood Remote ControlClean-air, containment or ventilation equipment.
Specification

How supporting equipment is specified

These items are normally chosen alongside the benches and hoods so worktops, service positions and dimensions agree. Standard values below are adjusted to your drawings, chemicals and local code.

WorktopsPhenolic 12.7/16 mm, epoxy 16/19 mm, ceramic 20 mm, stainless 304/316, PP or Trespa Toplab Plus; cut to sink and service cut-outs
Clean airLaminar flow and biosafety cabinets, air showers, pass boxes and clean booths, with HEPA filtration matched to the required cleanliness
Support equipmentContainer laboratories, dental lab tables and laboratory refrigeration laid out to the process
FittingsSinks, stools and chairs, eyewash and shower, pegboards, water faucets and gas faucets fitted at the factory
ExtractionFans, blowers, scrubbers and venturi valves sized to the connected airflow and duct resistance
MaterialsSteel epoxy coated, PP, FRP or stainless 304/316, selected to the chemicals and washdown regime
CustomisationDimensions, service positions, finishes and fittings adjusted to the project drawing
PackingKnock-down or assembled, EPE foam, carton and plywood crate for sea freight
Where it is used

Where these go

  • Chemistry, analytical and QC laboratories
  • Hospital, university and research labs
  • Pharmaceutical, food and cleanroom environments
  • Field, temporary and modular testing labs
Need a price for a specific room? Send the layout and the equipment list.
Get a Quote
Questions

Common questions

What products are in this Other category?

Clean-air and biosafety cabinets, air showers, pass boxes and clean booths; laboratory worktops; supporting equipment such as container labs, dental tables and refrigerators; and bench fittings including sinks, seating, eyewash, taps, gas valves and extraction fans.

Can these be supplied together with benches and hoods?

Yes. Fittings, worktops and equipment are normally specified together with the bench and hood run so finishes, service positions and dimensions line up on site.

Are these items made to order?

Standard configurations are available, and sizes, materials and service positions are adjusted to your drawings and chemicals. Send the layout and requirements for a schedule.

Related

Related ranges

Send your layout, get an equipment schedule

Send the room plan and the items on your list. You get back a schedule with materials, sizes, service positions and a factory-direct price.

Send Your Drawings
WhatsApp