A welded polypropylene cabinet built for dilute acids and corrosive reagents, where a steel body would rust or pit over time.
The PP cabinet is welded from polypropylene sheet so body, doors, shelves and trays resist dilute acids and corrosive vapors that stain steel. It suits acid digestion stores, wet chemistry rooms and washdown areas where moisture and acid fumes are continuous. Welded corners leave no seam for acid to creep behind.
These are standard values; anything here can be changed to suit your drawings or local code. A cabinet run is usually specified together with lab benches and extraction in the same finish.
| Body | Welded polypropylene (PP) sheet, 10–15 mm; no steel in contact with chemicals |
|---|---|
| Shelving | Adjustable PP shelves with integral PP spill trays |
| Doors | PP doors, welded hinges, 180 degree opening |
| Fasteners | PP or stainless 316 fittings, no exposed mild steel |
| Ventilation | PP bungs top and bottom for extraction connection |
| Finish | Epoxy powder-coated steel (or polypropylene / stainless as specified); any RAL colour |
| Sizes | Standard widths 900, 1200, 1500 mm; custom widths and heights to your drawing |
| Packing | Knock-down or assembled, EPE foam, carton, plywood crate for sea freight |
PP handles most dilute acids and aqueous reagents; strong organic solvents and concentrated oxidizers need a compatibility check. Send the chemical list and we will confirm the lining.
If solvents or volatile acids are stored, connect it to extraction. Where no duct route exists, a filtered recirculating option can be sized to your chemicals.
Natural grey or blue PP is standard; other PP colours are checked against availability before the order is confirmed.
Send the room plan and what goes inside. You get back a schedule with sizes, lining, shelving and a factory-direct price.
Send Your Drawings